 |
|
|
 Needle
Valves
TMN Series
Designed for extremely precise control of air and hydraulic fluids.
Features
- Easy-to-read colour bands and micrometer knob
provide exact flow settings
- Re-set repeatability within 1%
- Precision machined double-step stem with fine
pitch thread provides accurate control, even at extremely low
flows
- Rugged, all-metal construction no plastic parts
- Brazed construction to withstand high pressure
- Set screw provided to secure valve setting
- Steel valves are zinc-plated and sealed with black chromate
for double corrosion protection
 FFG
2000 Series
Ideal for applications which require fine metering and positive
shut-off. Designed for use with air, oil, water, steam, liquid fuels
and most chemicals.
Features
- Heavy duty construction for strength and safety
up to 10 000 psi (690 bar)
- Precision-machined stems and valve bodies provide
perfect seat alignment for leak-free shut-off
- Carbon steel valves are zinc plated and sealed
with black chromate for double corrosion protection
- Available in panel or in-line mounted configuration
 FFA
2000 Series
Ideal for applications which require fine metering and positive
shut-off. Designed for use with air, oil, water, steam, liquid fuels
and most chemicals.
Features
- Heavy duty construction for strength and safety up to 10,000
psi (690 bar)
- Precision-machined stems and valve bodies provide
perfect seat alignment for leak-free shut-off
- Carbon steel valves are zinc plated and sealed
with black chromate for double corrosion protection
- Available in panel or in-line mounted configuration
- 303 and 316 stainless steel valves available
on special order
 Check
Valves
C Series
Especially designed for the control of hydraulic or pneumatic systems.
The poppet valve unseats against a spring to permit free flow in
one direction. As the flow stops the poppet valve reseats to prevent
return flow thereby locking the load.
Features:
- Operating pressure to 5075 PSI
- -29degrees C to 100 degrees C
- 5 or 65 PSI cracking pressure
- NPT or SAE ports
- Sizes up to 2"
- Zinc plated finish for double corrosion protection
 Flow
Controls
TMF Series
Designed for extremely precise control of hydraulic and pneumatic
actuators. Provides metered flow in one direction and free-flow
in the reverse direction.
Features:
- Easy-to-read colour bands and micrometer knob
provide exact flow settings
- Re-set repeatability within 1%
- Precision machined double-step stem with fine
pitch thread provides accurate control, even at extremely low
flows
- Rugged, all-metal construction, no plastic parts
- Bleed holdes in piston provide a cushion to soften
closing impact and extend valve life
- Brazed construction to withstand high pressure. Steel valves
are zinc-plated and sealed with black chromate for double corrosion
protection
 Low
Pressure Ball Valves
S95 NPT Series
Ball valves - Full Port 1/4" - 4" Hot Forged Brass
Features:
- Hot forged, un-plated brass body to DIN
- Certification and Approvals for: American Gas Approval (AGA),
Canadian Gas Approval (CGA), UL, CUL, FM, UPC
- Full Port for maximum flow
- Chrome plated brass ball
- Teflon Seals
- 600 PSI WOG up to 2". 450 PSI WOG up to 4"
 High
Pressure Ball Valves
2 way ball valves, 3 way ball valves, mini ball valves, optional
locking kits
Features:
- Pressure rating up to 7250 PSI
- Steel body and ball
- Zinc plated body for corrosion protection
- Delrin ball seals and Buna-N shaft seals
|
|
|
